|
Manufacturer and Materials
|
|
|
|
|
(a) TopSlateTM ridges, hips and vents shall be manufactured under license by Castle Metal Products,
Tel: 847-806-4540
|
| (b) Model: (as selected from Manufacturer's Model Sheet, see
"Models" above). |
| (c) Color: (as selected from Manufacturer's standard color chart) |
|
|
|
|
|
| (a) Ventilating base shall be continuous, low profile and resistant to compression, providing a net free area of 18 square inches per lineal foot of ridge or hip. Ventilating base shall be approved for use by TopSlateTM Manufacturer. |
| (b) Ridge and hip ventilation shall be accompanied by adequate soffit ventilation. |
|
|
|
|
Slate
|
| (a) Slate shall be ______ inches long (consult TopSlateTM manufacturer, provide pitch; if possible, provide sectional ridge drawing) and less than 5/16 inches thick. (If other, advise manufacturer.) |
(b) All slate shall be hard, dense, sound rock. Slate shall be unpunched. No cracked slate shall be used. All exposed corners shall be practically full. No broken corners on covered ends which sacrifice secure attachment will be allowed.
|
| (c) Color shall approximate field states (or shall be:_______). |
|
|
|
Scope of Work
|
|
|
Ridges
|
| (a) All ridges shall be finished with the TopSlateTM system (specify: ventilated or unventilated). |
|
|
|
Hips
|
| (a) All hips shall be finished with the TopSlateTM system. |
|
|
|
|
| TopSlateTM: Follow Manufacturer's recommendations. |
|
Ventilating Base: Follow recommendations of vent manufactrer while observing recommendations of TopSlateTM manufacturer.
|
|
|
|
In presenting this information, we serve only in an advisory capacity and can undertake no liability. Neither Castle Metal Products nor TopSlate's developer nor it's licensor shall be liable for special, indirect or consequential damages. The liability of Castle Metal Products (and that of TopSlate's developer and its licensor), in the event of sale of it's products, shall be limited to replacement by Castle Metal Products of any defective or nonconforming products or refund of the purchase price.
|
